The Lubi MH, LHP, LMF Hydro series are state-of-the-art designed compact, automatic pressure booster pumps.

Lubi offers below series as pressure booster pump:

1.) “LHP” SERIES PRESSURE BOOSTER PUMP
It consist of our PCJ standard pump series. PCJ pumps are
horizontal, single-stage, centrifugal, shallow-well self
priming jet pumps. Pumps have suction port above pump
axis and radial discharge port. The pump is fitted with a
maintenance-free, mechanical shaft seal.

2.) “LMF” SERIES PRESSURE BOOSTER PUMP
It consist of our MFHC standard pump series. MFHC pumps
are non-self priming, horizontal, multi-stage, centrifugal
pumps. Pumps have suction port above pump axis and radial
discharge port. The pump is fitted with a maintenance-free,
mechanical shaft seal.

3.) “MH” SERIES PRESSURE BOOSTER PUMP
It consist of our MH standard pump series. MH pumps are
non-self priming, horizontal, multi-stage, centrifugal pumps.
Pumps have axial suction port and radial discharge port. The
pump is fitted with a maintenance-free, mechanical shaft
seal.

These systems are supplied as complete, preassembled and
factory tested systems including a close-coupled pump,
bladder type pressure tank, pressure switch, pressure gauge
(or electronic switch), special connector and flexible pipe for
systems with pump over the tank.

These systems can work according to the any decrease or
increase of pressure, the pressure switch determines when
the pump will start or stop.

NSF Standard 61, CE/PED, WRAS, ACS, ISO:9001,
Gost , Evrazes approved
pressure tank
Easy installation
Reliable and user friendly operation
Adjustable pressure
Reliable constant pressure water supply
Two part polyurethane, epoxy primed paint finish tank
Leak free, o-ring sealed air valve cap provided on tank
Corrosion resistant
Good air handling
Reliable and robust construction
Low noise level

Flow range: Up to 10 m³/h
Max. working pressure: 10 bar
Ambient temperature: Max. +50°C
Liquid temperature range: 0°C to +90°C

MOTOR
Motor type: TEFC 2-pole motor
Ratings: 1 phase – 0.37 to 1.50 kW
Rated speed: 2900 rpm
Enclosure class: IP 44
Insulation class: F
Nominal voltage: 1 phase 230 V (Tolerance +5% / -15%)
Supply frequency: 50 Hz
Duty / Rating: S1 / Continuous
Direction of rotation: Clockwise as seen from the motor rear end

These pumps are suitable for liquids which are potable & rain
water other than thin, clean, non-aggressive, non-explosive,
not containing solid particles or fibres.

Pumps are designed for liquid transfer & pressure boosting
systems in:
Households, commercial complexes
Gardens,
Agriculture
Horticulture
Small industries
Car washing
Cooling systems
Drawing water out a well.